Polypipe Wet Room Sensor PB23020
Special Price £11.68 (Inc.Vat)
Special Price £ 27.96 SAVE: 59%
Availability: In Stock
Polypipe PB23020
Wet Room Sensor:
If you want to install underfloor heating into a bathroom or wet room
then a wet room sensor will be needed. This Polypipe WRAS approved wet room
sensor can be installed in bathrooms, en-suites bathrooms and shower rooms. A
room thermostat can then be fitted outside the wet area to control that rooms’
temperature.
The sensor is connected to the room thermostat using the supplied 3 metre
cable.This distance can be extended to a maximum of 10m providing a similar
type of cable is used.
Generally the sensor is mounted on a wall however; the sensor cover can
be removed so that it be used as a floor temperature sensor if sensitive floor
coverings are installed, or if the room
is receiving supplemental heat from say an AGA Cooker or other heat
source. This can help to avoid 'cold tiles' beneath the feet!
Room Temperature
Controls
In general an underfloor heating systems control setup will have - room
thermostats, a master wiring centre,
slave units, used for multiple room control, zone valve and actuators.
Polyplumb Manifolds and Controls are common to all Polyplumb underfloor heating systems.
.jpg)
.jpg)
.jpg)
.jpg)
