Stuart Turner Monsoon Single Universal 4.5 Bar Pump - 46414

The Monsoon 4.5 bar single pump can be used in pairs to boost vented systems to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required.

Ideal for boosting hot water service to a common mixer where the cold supply is mains fed.

Ideal for boosting hot and cold supplies separately.

Suitable for increasing water pressure to a combi boiler via a break tank.

Stuart Turner 4.5 bar Single Features:

Max inlet head – 12 metres

Power consumption – 555 watts

Rating – 4.5 bar

Maximum Flow litres per minute – 26

Robust brass/stainless steel bodied construction

Fully WRAS approved and CE compliant

Noise Level – 70 db

Long life with built in engineering excellence

Up to 5 Years warranty

Whats in the Box:

1 x monsoon pump

2 x Push-in flexible hoses supplied by manufacturer 3/4 female x 22 mm push-in 300 mm long Isolating valves on all hoses

Built in pressure switch that will automatically stops the pump and re-pressurises the system

Built in flow switch that will automatically starts the pump

Anit-vibration feet

Monsoon Universal pumps remove the guesswork from pump selection. Fully automatic, they will function under both positive and negative head conditions and are suitable for installation into an open vented hot and cold water system.

Universal Monsoon pumps do not require a gravity flow of water to start. Universal single pumps can be used in pairs to boost hot and cold water supplies independently, or as a single pump to boost a water supply as required.