Stuart Turner Monsoon Single Positive Head 2.0 Bar Pump - 46497

The Monsoon S2.0 single pump is ideal for boosting the water pressure and flow in vented systems.

They may be used to boost the water pressure in either the hot or cold water supply or boost the blended water outlet between the shower valve and the shower rose.Please note this is NOT suitable for pumping water supplies to common mixers.

Stuart Turner 2 bar Single Features:

Max inlet head – 8 metres

Power consumption – 245 watts

Rating – 2 bar

Maximum Flow litres per minute – 27

Robust brass/stainless steel bodied construction

Fully WRAS approved and CE compliant

Noise Level – 70 db

Long life with built in engineering excellence

Up to 5 Years warranty

Whats in the Box:

1 x Monsoon pump

2 x Push-in flexible hoses supplied by manufacturer 3/4 female x 22 mm push-in 300 mm long Isolating valves on all hoses

Built in pressure switch that will automatically stops the pump and re-pressurises the system

Built in flow switch that will automatically starts the pump

Anit-vibration feet.

Where an open vented positive head system exists with a minimum gravity flow of 0.6 l/min, then the Monsoon Standard is the perfect solution.

Standard single pumps are ideal for boosting water pressure and flow. They can be used to:

Boost the water pressure in either the hot or cold water supply

Boost the blended water outlet between the shower valve and the shower rose

Not suitable for pumping water supplies to common mixers

All pumps supplied with 22 mm push-in x 300 mm anti-vibration flexible hoses

All flexible hoses feature integral isolating valves

All pumps supplied pre-wired with 1.5 metre cable

Anti-vibration feet

All pumps have G threaded connections

Reassurance of up to a 5-year guarantee (subject to conditions)